Having good software to create and mix music is not as expensive as some people think. There are software programs to harness musical creativity with lots of tools and resources and Virtual DJ is one of them, which also incorporates video editing features for videoDJs.
Mar 12, 2017 How To Make A DJ Playlist On A Laptop Computer with numark CUE Virtual DJ Software - Duration. How to Download Numark Cue Full Version POWERED BY VIRTUAL DJ - Duration: 6:42.
DJ software with over 20 years of experience
Thanks to its easy-to-use interface, users who are new to DJ software will immediately know how to use the most common options. Simply open the folder where the songs are located and drag them to the track where you want it to sound. From there, just add effects, set or change the BPM, make loops, scratches and all the rest.
Free software but with professional options and features.
In fact, its design is studied to the millimetre, with divisions by work area: on the upper part you will find the players and the options for controlling the wave, pitch or CUE; on the lower part you can access the different directories of the hard disk where you can see the covers and quickly access the playlists.
Main features
It is one of the most complete audio mixing software. It is equipped with the following options and features:
- Ability to mix sound and video.
- Scratch.
- Locator of 3 CUE points per track.
- Support for up to 99 decks.
- Recording of musical sessions.
- Creation of playlists.
- Sandbox or safe mixing area.
- Creation of loops of variable duration.
- Playback and pitch control.
- Built-in mixer with EQ and gain control.
- Master tempo, auto mix and BPM detector options.
- Sample launcher with 14 audio effects, 12 video effects and almost 20 different transitions.
A full repertoire of options that turn your PC into a complete mixer.
Song mix always under control
This software allows you to always control the mix of songs. Among other things thanks to the sandbox, among other things, the DJ can mix tracks at the same time as the audience listens to another song. In this independent workspace he will be able to prepare the next mix with the confidence of knowing that it will be just the way he wants.
Built-in editors
Another of the main features available is the wide range of editors available:
- AutoMix: allows you to prepare a mixing sequence that you can also remember for the future, so that when mixing two tracks unless you specify otherwise, the software will automatically enter and exit at the same points.
- Track Cleaner: allows you to edit songs by removing lyrics, intros or anything else you consider secondary.
- Video Editor: possibility to add text or audio effects to a video. It is obviously designed for videodjing.
- Sample Editor: allows you to adjust most samples, be it sound, video and image, and even combine them.
- Point of Interest Editor: These points of interest (POI) are the CUE, AutoMix points, loops, etc. that are set for each song.
- BPM Editor: Allows you to set the beat per minute of the songs, even of different beats in the same song.
- Tag Editor: With the tags you can group the different songs according to different criteria and retrieve them easily when you need them.
How much does Virtual DJ cost?
There are different versions of VirtualDJ with different prices depending on the use:
- VirtualDJ Home: it is designed for users who don’t give it any professional use.
- VirtualDJ LE: for advanced home users who connect the software to professional equipment such as MIDI controllers. It comes with the controller and the price changes depending on the model.
- VirtualDJ Plus: for professionals. Its price ranges from $49 to $249.
- VirtualDJ PRO: to be purchased as part of a monthly subscription of $19 or an annual payment of $299. It is also dedicated to professional users and the advantage is that you can count on custom configurations and definitions for the controller used, transmit via the Internet to a radio server or use a recording for podcasting.
Numark N4 - Setup with Virtual DJ LE
The Numark N4 has a ton of features that allow for in-depth control of Virtual DJ LE. To help ensure that you are up and running, this guide walks through the steps to make sure that your N4 hardware and software are configured correctly and ready to go.
Contents
- Software Setup
- Further Tech Support
Hardware Setup
Numark N4 Controller
- Connect the N4 to a USB port on your computer. Avoid connecting to a USB Hub.
- Power ON the N4.
- On the front of the N4 hardware set both SOURCE switches to PC.
- Assign the crossfader using the X-FADER ASSIGN buttons. These are located to the left and right of the crossfader. Set the left side to 1 and 3. Set the right side to 2 and 4.
- Set the 4 GAIN knobs for CH 1-4 between 12 o'clock and 2 o'clock.
- The MASTER volume knob is located to the right of the large BROWSE knob in the upper-right of the mixer section. Start with this set to a low setting of 9 o'clock.
- Start with the CH 1-4 volume sliders set to the thick line located about 3 lines from the highest setting.
PA and Headphone Connections
- Make sure your powered speakers or PA system are connected to either the BALANCED OUTPUT or MASTER RCA ports on the rear of the N4.
- If youll be using headhpones for cueing up new songs, connect them to the HEADPHONE port on the front of the N4.
Software Setup
Virtual Dj 10 Free Download
Before you begin
The included Virtual DJ LE Software cannot be used on a computer which has other versions of Virtual DJ or Numark CUE software installed. Multiple installations of related products will conflict with each other.
If you own the full version of Virtual DJ Pro, or Numark CUE, use this software instead of the Limited Edition (LE) version of Virtual DJ included with your N4. The instructions below also apply to Virtual DJ Pro and Numark CUE.
Make sure that only the one version of Virtual DJ or CUE you'd like to use is installed on your computer. Uninstall any other versions of Virtual DJ or CUE.
Latest Software
If using Virtual DJ LE, download the latest version of Virtual DJ LE from the webpage below. You will be asked to enter your Authorization Code. Once downloaded, install the software.
Need help authorizing the software? Just visit the link below:
Virtual Dj Cue Point
- www.numark.com/authorizationhelp
Virtual DJ LE Software Setup (PC)
- First install the ASIO4ALL driver located on your Virtual DJ LE installation disc. You can also download this program for free here:
www.asio4all.com - After you have installed ASIO4ALL, launch Virtual DJ LE. Once opened, click the Config button in the upper-right of the screen to open the Settings window.
- Under the Sound Setup tab, you'll find that when using the included LE version of Virtual DJ the Inputs setting is fixed at None.
- Set Outputs to Single Output.
- Set the Sound Card to ASIO DRIVER.
- Click the ASIO Config button.
Here you will see two options, your internal soundcard and the N4. Uncheck the power button next to your internal soundcard and leave only the USB Audio Device or N4 selected. - Click the to close this window.
- Change your output to Headphones.
Be sure to the right of Headphones you have the following selected: - Click Apply then OK.
Selecting and playing a song in Virtual DJ LE
- Set the crossfader on the N4 to the left or right position (which ever deck you want to hear first.)
- On the N4 hardware, use the BROWSE knob to scroll up and down the library browser in Virtual DJ LE. Press in on this knob to enter a folder. Press the LOAD button above each GAIN knob to load the selected track to that deck.
- Once you have loaded a track to each deck, press the PLAY button on the deck to begin playback.
Virtual DJ LE Software Setup (MAC)
- Launch Virtual DJ LE. Once opened, click the Config button in the upper-right of the screen to open the Settings window.
- Under the Sound Setup tab, you'll find that when using the included LE version of Virtual DJ the Inputs setting is fixed at None.
- Set Outputs to Headphones.
To the right of Outputs be sure you have the following selected: - Under Sound Card choose 4 Out Card and to the right N4.
- Choose Apply then OK.
Selecting and playing a song in Virtual DJ LE
- Set the crossfader on the N4 to the left or right position (which ever deck you want to hear first.)
- On the N4 hardware, use the BROWSE knob to scroll up and down the library browser in Virtual DJ LE. Press in on this knob to enter a folder. Press the LOAD button above each GAIN knob to load the selected track to that deck.
- Once you have loaded a track to each deck, press the PLAY button on the deck to begin playback.
Download Virtual Dj 7
Also See...
Numark Support & Warranty Service
Whether you are a customer or dealer, if you already own a Numark product, or if you just have pre-sales questions, the Numark technical support team is available to help!
Numark Cue Virtual Dj Download
Virtual Dj Cue download free. full Version
Visit the link below to connect with any of the following support options: online community support, phone support, email support.